Do It Yourself

If you are in the market for a new garage door, you may wish to consider installing the door yourself. If you decide to go this route, keep in mind that the garage door is the largest mechanical device in your home, and it has many parts. The door can weigh up to 400 pounds and has a lot of springs. Garage installation can be dangerous and can cause injury.

There are four main types of garage doors. A swing hung door opens to the side and is typically found on carriage houses or barns or. An ‘up and over door swings out and up, and it rests parallel to the garage ceiling. Sectional and roller doors consist of several sections that are connected by hinges. These types of doors are not required to swing out into the driveway to open, and they maximize the width of the garage.

Most people choose to have a professional install the door; however, if you do choose to do the installation yourself, a sectional door is the best type of garage door to have.

Unless the door that you plan to install is on a new house, your first step will be to remove your existing garage door. Remember that this is a dangerous task if you do not know what you are doing. This first thing to take into account is the spring system on the door. Springs have a lot of tension can be very dangerous to adjust or install. You should ensure that the garage door you are removing includes a torsion spring system. Do not attempt to cut cables or take the springs apart, and remember that there is the most spring tension when the door is closed. You need to make sure that you release the spring tension before you remove the door.

After you remove your old door, inspect the wood that surrounds the doorframe and ensure that no rotted wood exists. You must have fresh new wood to hold the brackets and springs for your new garage door.

Follow the instructions from the manufacturer when installing a new door. Try not to become overwhelmed with the number of parts and steps. You should use the hardware supplied by the garage door manufacturer.

Important things to remember for garage installation include ensuring that the track bottoms and the door are level (especially on the first section), ensuring that the brackets on the bottom of the door are fastened securely to the door, aligning and supporting the overhead track, and ensuring that there is correct spring tension. Installation

Want to find out more about Washington DC Garage Door, then visit Dean Hartkins’s site on how to choose the best repair or installation option for your needs.